DIY Air Conditioning Installation Tips

Individuals who are knowledgeable with handling air conditioning units and electrical appliances will find it relatively easy to perform do-it-yourself air conditioning installation.

Installing HVAC units can be done through DIY methods. It is more affordable for the homeowner since you do not have to pay any technicians. All you need initially is to draft a plan and look for a capacity calculator to find out the requirements for air conditioning installation. Bear in mind that the unit should be put at a distance from exterior walls. This will minimize any vibration and enable hassle-free access for maintenance procedures. You will also need certain tools such as the vacuum pump, hose cutter and refrigerant manifold gauge set. The appliance should be put on top of a concrete or wooden padding. The material should be durable enough to withstand the natural elements such as rains and hot weather conditions.

ac estimates

Useful Pointers in Actual Installation

Choose a suitable location for the window air conditioner. This will ensure proper air circulation inside your house as well as easy access to electrical wiring and drainage pipes. You should have a detailed pipe layout so you will know where to make the necessary cuts. Try to bend edges of the pipes on smaller tubes before starting the installation.

The ideal measurements for window air conditioning are two meters above the floor surface and 10 to 70 centimeters on all flanks for proper movement. This appliance should not be positioned near a steam or heating source. The wall must be resilient enough to bear the weight of the unit. The outdoor component should be connected to the indoor part. It is meant to withstand any kind of weather but just the same, it should not be exposed to direct rays of the sun.

The warranty for self-installed air condition units is automatically nullified. At the same time, only a licensed technician is permitted to install refrigerant in these units and work with gas lines. Incorrect installation does not only cancel warranties. It is also very risky so leave this task to professionals if you are not sure about the entire process. Be sure to follow the manual to the last detail if you plan to go on with the installation.

In mounting the air conditioner, you need to fasten the bracket securely against the concrete wall. This will guarantee that the full weight of the unit is supported. You need to drill the holes mainly for the water discharge duct and connection wire prior to joining the appliance to the framework.

Make sure that the pipe connections are tight to prevent leakage of Freon. However, this should not be too tight to avoid damages to the fittings. The cylinders should also be insulated well with foam material and secured to the wall as safety precautions.

Lastly, it is important to force out air from the air conditioning unit and the pipes. This procedure calls for accurate timing. You will need a digital watch and follow pointers from the manufacturer. Finish the electrical connections and inspect all aspects of your installation carefully before putting on the switch.